DL-2 Stimulator

The following features of the pulse Stimulator.
1. Plain Faradic Current.
2. Surged Faradic current
3. Pulsed Galvanic current

DESCRIPTION OF CONTROLS

ON/OFF SWITCH : This is provided at the backside of the unit
GAL/FAR SELECTOR : Used to select either Galvanic or Faradic SWITCH mode of current required.
SURGE CONTROL : To adjust surge rate in interrupted Faradic mode.
INTENSITY CONTROL : To adjust level of intensity, in both Galvanic & Faradic modes.

OPERATING PROCEDURE

• Ensure all controls in the minimum position and the unit is in OFF position.
• Fix the electrodes to the patient.
• Select either Galvanic or Faradic modes are required.
• Galvanic Mode : Select plain or interrupted Galvanic mode as desired. : In the interrupted mode select duration and pulse rate as desired.
• Faradic Mode : Select either plain or interrupted mode : Select desired surge level in interrupted mode.
• Switch on the Machine.
• Adjust intensity control slowly till the desired level of stimulation is achieved.

PRECAUTIONS TO BE OBSERVED

• Ensure proper EARTHING CONNECTION.
• Take proper care to wet the electrodes to ensure good body contact.
• Switching “ON” the machine when the intensity control is not at ZERO may cause a severe shock to the patient and should be avoided.
• Ensure that the two electrodes do not touch each other when the unit is switched on.
• There are no user serviceable parts in the machine. Refer any complaints to the manufacturer/their authorized distributors..

STANDARD ACCESSORIES

• Muscle stimulator cable 2 pc.
• Muscle stimulator pad 2 pc
• Velcro Belt 2 Pc.
• Unit Cover 1 Pc.

FRONT PANEL

• Search duration control
• Search faradic & Interrupted Galvanic selector switch.
• Intensity control
• Muscle stimulator Adult & child selector switch.
• Intensity control